LENNIX® Pro
Full control over your crane.
The basic equipment
LENNIX® Pro in its basic configuration consists of an industrial PC that receives, modulates and outputs the crane operator's driving signals.
Anti Sway
Uncontrolled oscillations of loads are a thing of the past.
Anti Sway
With camera — the standard
In order to also take external influences such as wind or oblique pull into account, a camera attached to the cat continuously recognizes the position of the load and thus corrects the mathematical model of pendulum damping.
Additional hardware components: camera, reflector
Without camera — open loop
For situations in which few external influences are to be expected, or in which a camera is impracticable, it is possible to let only the mathematical model work.
With AI — gripper recognition
Especially for gripper cranes on which a reflector cannot be mounted, we have the option of ensuring the position of the gripper with the help of image recognition.
Additional hardware components: camera
Anti Sway for slewing gear
In addition to damping the load in the direction of the trolley and crane, LENNIX® Pro can also compensate for slewing gear sway.
Anti Sway for slewing gear
It is important that the crane has a slewing mechanism. Here, too, there are the options with camera and without camera.
With camera — the standard
In order to also take external influences such as wind or oblique pull into account, a camera attached to the cat continuously recognizes the position of the load and thus corrects the mathematical model of pendulum damping.
Additional hardware components: camera, reflector
Without camera — open loop
For situations in which few external influences are to be expected, or in which a camera is impracticable, it is possible to let only the mathematical model work.
Collision avoidance
Accidents caused by the carelessness of employees can thus be avoided.
Collision avoidance
In addition to this feature, anti sway is a prerequisite for knowing the position of the load at all times.
Dependence: Anti Sway
Collision avoidance to the neighboring crane
LENNIX® Pro monitors the distance to the neighboring crane and helps avoid collisions.
Collision avoidance with obstacles
LENNIX® Pro monitors the crane operator's control signals. If the operator is in danger of driving into an obstacle in the hall layout, the system intervenes carefully. Dynamic obstacles, such as vehicles in the work area, can also be switched on and off.
Smart Activation - for the self-determined crane driver
If one of your crane operators prefers to drive without sway control, we can run collision protection in the background so that it intervenes as soon as danger is detected.
Semi-automatic operation
Repetitive moves at the push of a button.
Semi-automatic operation
In addition to the hall layout, important positions can be saved with LENNIX® Pro. For example, repetitive trips, such as equipping presses with tools or unloading bulk material into designated bunkers, can be carried out automatically at the push of a button. LENNIX® Pro takes care of finding the most efficient route and avoiding obstacles.
Oscillating damping is a prerequisite for automating your crane.
Fully automatic operation
Repetitive movements through a higher-level system.
Fully automatic operation
If the crane's tasks are so repetitive that no one is needed anymore to monitor them, the positions can also be specified by a higher-level system and LENNIX® Pro then controls the crane fully automatically. Especially with coil cranes, this system has already proven effective and results in availability of up to 95%.
Oscillating damping is a prerequisite for automating your crane.
Tracking and synchronization control
Minimize wear and prevent crane tilting.
Tracking and synchronization control
It is not only the oscillating of the load that is undesirable. Even if the supports of gantry cranes do not run parallel to the rails or to each other, it has unpleasant effects, such as increased wear and wedging of the crane. LENNIX® Pro can also help here.
options
Spurrelger
Lane control ensures that the crane runs in the middle and straight on the rail. The inductive sensor on the crane constantly determines the relative position of the rails to the crane. As soon as a sensor detects a deviation of the rail from the optimum, readjustment is carried out.
Applications: bridge and semi-portal cranes
Additional hardware: inductive sensors
Synchronization Control — The Synchronized Dancer
Synchronization control monitors the position of the supports relative to each other. A camera looks from one support to another support, where a reflector is mounted. If one of the other's supports runs away, their speed is slightly reduced and that of the other is increased until the supports are parallel again.
Application: gantry crane
Additional hardware: camera and reflector
Anti Skew
Camera-based torsional vibration damping of the spreader using the TLS cylinders.
Anti Skew
Camera-based torsional vibration damping of the spreader using the TLS cylinders
Bay Intelligence
100% detection and management of dynamic obstacles such as ships, containers and guide rails.
Bay Intelligence
Predictive maintenance
Continuous monitoring of relevant performance indicators such as movement, load weight, throughput, energy consumption and maintenance recommendations.
Predictive maintenance
Next Step Assistance
Automatic target calculation for easy loading and unloading, 2% higher long-term efficiency.
Next Step Assistance
Automatic target calculation for easy loading and unloading, 2% higher long-term efficiency.
Row by Row' mode
In this mode, the ship is loaded or unloaded row by row, i.e. the next target position is one container width next to the previous one.
Stack by stack' mode
In this mode, the ship is loaded or unloaded in stacks, i.e. the next target position is one container height above or below the previous one.
Soft Landing
Reduction of lifting speed just before setting up, 15% longer operating time for spreaders, ropes and containers, 7 dB (A) less noise pollution.
Soft Landing
Smart Configuration
Web browser-based start-up with integrated documentation and guided commissioning, automatic parameter calculation, error detection and database-based logging of system states, optimized for mobile devices.
Smart Configuration
Performance level d
100% hardware failure detection
Performance level d
LENNIX® Service
Worldwide support, commissioning or training on site or remotely.
LENNIX® Service
Weltweite Unterstützung, Inbetriebnahme oder Schulung vor Ort oder aus der Ferne.